招标公告-资格预审

广州赛宝计量检测中心服务有限公司数字信号分析仪及HDMI测试软件采购项目-公开招标公告

发布时间：2023-11-17

广州赛宝计量检测中心服务有限公司数字信号分析仪及HDMI测试软件采购项目 - 国际招标公告

广东华伦招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2023-11-17在中国国际招标网公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。
1、招标条件
项目概况:本次招标货物包含数字信号分析仪1套及HDMI测试软件1套。招标设备的整体安装、调试、试运行、验收和质保期服务等服务内容在内的一揽子项目。该项目为交钥匙项目。
资金到位或资金来源落实情况:资金已落实。
项目已具备招标条件的说明:项目已审批。
2、招标内容
招标项目编号:0809-2340GZI14246
招标项目名称:广州赛宝计量检测中心服务有限公司数字信号分析仪及HDMI测试软件采购项目
项目实施地点:中国广东省
招标产品列表(主要设备):

序号	产品名称	数量	简要技术规格	备注
1	数字信号分析仪	1套	模拟带宽：≥16GHz（4通道），≥ 20GHz（2通道），支持升级≥ 32GHz带宽 4通道采样率：≥40GSa/s，2通道采样率：≥80GSa/s 边沿触发带宽：≥20GHz 存储深度：≥200 MPts/通道，支持升级至2GPts/通道固有抖动：≤100 fs RMS ADC位数：≥8bits，其有效符号数（@7 mV/div）：≥5.5bits Clock抖动分析，包含但不仅限于：时间间隔误差，n周期，周期到周期，+宽度到+宽度，-宽度到-宽度，占空比到占空比探头：探头放大器，20GHz，2个；差分SMA探头，20GHz，2个
2	HDMI测试软件	1套	包含HDMI 物理层测试套件：覆盖HDMI1.4、HDMI 2.1 物理层一致性测试软件探头：探头放大器，20GHz，2个；差分SMA探头，20GHz，2个

3、投标人资格要求
投标人应具备的资格或业绩:1）如果投标人按照合同提供的货物不是投标人自己制造的，投标人应提供制造厂商或制造厂商授权代理商针对本项目的授权书的正式授权书（格式见《机电产品采购国际竞争性招标文件》（第一册））； 2）投标人须提供其开户银行在开标日前三个月内开具的资信证明原件或该原件的复印件(如资信证明中明确注明复印无效的则必须提供该资信证明原件，招标机构保留审核原件的权利)； 3）其他资格证明文件： ①投标人营业执照或企业注册证明复印件； ②外贸合同签约卖方原则上必须是原厂商或其代理商。若投标人为原厂的中国区代理商，且在外贸合同中以原厂的中国区代理商身份作为卖方，还应出具相应的销售资质证明； ③非中国境内的设备制造商或其代理商需证明其在中国大陆有分公司或者办事机构，提供服务保证。（提供售后服务条款，售后服务机构地址）
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:2023-11-17
招标文件领购结束时间:2023-11-24
是否在线售卖标书:否
获取招标文件方式:现场领购
招标文件领购地点：广东华伦招标有限公司网站“中招联合电子招标平台供应商在线服务”（https://www.gdhualun.com.cn/）
招标文件售价:￥500/$70
其他说明:凡有意购买文件的单位请在标书发售截止时间前登录我公司网站“中招联合电子招标平台供应商在线服务”（https://www.gdhualun.com.cn/）购买招标文件。平台操作相关问题请查询网站“通知公告”栏目（https://www.gdhualun.com.cn/announce/）中《供应商操作指南》（或咨询我公司020-83172166转834/862、020-83527049；QQ：2127233298）。本公司只接受通过以上方式正式获取招标文件的供应商参加投标。
5、投标文件的递交
投标截止时间（开标时间）:2023-12-08 10:30
投标文件送达地点:广州市越秀区广仁路1号广仁大厦6楼会议室
开标地点:广州市越秀区广仁路1号广仁大厦6楼会议室
6、投标人在投标前应在必联网（https://www.ebnew.com）或机电产品招标投标电子交易平台（https://www.chinabidding.com）或中国国际招标网（http://chinabidding.mofcom.gov.cn）完成注册及信息核验。评标结果将在必联网和中国国际招标网公示。
7、联系方式
招标人:广州赛宝计量检测中心服务有限公司
地址:广州市增城区朱村街朱村大道西78号
联系人:梁工
联系方式:020-87236480
招标代理机构:广东华伦招标有限公司
地址:广州市越秀区广仁路1号广仁大厦6楼
联系人:宋工
联系方式:020-83172166-846
8、汇款方式:
招标代理机构开户银行(人民币):/
招标代理机构开户银行(美元):/
账号(人民币):
账号(美元):

Guangdong Hualun Tendering Co., Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on2023-11-17
1、Bidding Conditions
Overview：The bidding goods include one set of digital signal analyzer and one set of HDMI testing software. A package of services including overall installation, debugging, trial operation, acceptance, and warranty period services for the bidding equipment. This project is a turnkey project.
Source of Funds:The funds have been secured.
Description of The Prepared Bidding Conditions:The project has been approved.
2、Bidding Content
Bidding No:0809-2340GZI14246
Project Name:Guangzhou Saibao Metrology and Testing Center Service Co., Ltd. digital signal analyzer and HDMI test software procurement project
Place of Implementation:Guangdong, China
List of Products:

NO.	Product Name	Quantity	Main Technical Data	Remarks
1	Digital signal analyzer	1	Analog bandwidth: ≥ 16GHz (4 channels), ≥ 20GHz (2 channels), supporting upgrade of ≥ 32GHz bandwidth 4-channel sampling rate: ≥ 40GSa/s, 2-channel sampling rate: ≥ 80GSa/s Edge trigger bandwidth: ≥ 20GHz Storage depth: ≥ 200 MPts/channel, supporting upgrade to 2GPts/channel Inherent jitter: ≤ 100 fs RMS ADC bit count: ≥ 8bits, its effective sign count (@ 7 mV/div): ≥ 5.5bits Clock jitter analysis, including but not limited to: time interval error, n-cycle, cycle to cycle,+width to+width, - width to - width, duty cycle to duty cycle Probe: Probe amplifier, 20GHz, 2; Differential SMA probe, 20GHz, 2 nos
2	HDMI testing software	1	Includes HDMI physical layer testing suite: covering HDMI 1.4 and HDMI 2.1 physical layer consistency testing software Probe: Probe amplifier, 20GHz, 2; Differential SMA probe, 20GHz, 2 nos

3、Qualification Requirements For Bidder
Qualifications or Performance:*1) If the goods provided by the bidder under the contract are not manufactured by the bidder themselves, the bidder shall provide a formal authorization letter from the manufacturer or authorized agent of the manufacturer for this project (see the format in the "International Competitive Bidding Document for Procurement of Mechanical and Electrical Products" (Volume 1)); *2) The bidder must provide the original credit certificate issued by their bank of account within three months before the bid opening date or a copy of the original (if the credit certificate clearly indicates that the copy is invalid, the original credit certificate must be provided, and the bidding agency reserves the right to review the original); *3) Other qualification documents: ① Copy of the bidder's business license or enterprise registration certificate; ② In principle, the seller who signs a foreign trade contract must be the original manufacturer or its agent. If the bidder is the agent of the original factory in China and serves as the seller in the foreign trade contract as the agent of the original factory in China, corresponding sales qualification certificates should also be provided; ③ Equipment manufacturers or their agents outside China shall prove that they have branches or offices in Chinese Mainland to provide Service guarantee. (Provide after-sales service terms, address of after-sales service agency)
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4、Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2023-11-17
Ending of Selling Bidding Documents:2023-11-24
Sell bidding doc online or not:No
To Obtain：:On-site Purchase
Place：https://www.gdhualun.com.cn/
Price of Bidding Documents:￥500/$70
Additional Instructions:For units interested in purchasing documents, please log in to our company's website "Online Services for Suppliers of China CNTC Joint Electronic Tendering Platform" before the deadline for bid issuance（ https://www.gdhualun.com.cn/ ）Purchase bidding documents. For platform operation related issues, please refer to the "Notice and Announcement" section on the website（ https://www.gdhualun.com.cn/announce/ ）Refer to the "Supplier Operation Guide" (or consult our company on 020-83172166 to 834/862, 020-83527049; QQ: 2127233298). Our company only accepts suppliers who have officially obtained the bidding documents through the above methods to participate in bidding.
5、Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2023-12-08 10:30
Place of Bid:Meeting Room, Floor 6, Guangren Building, No. 1, Guangren Road, Yuexiu District, Guangzhou
Place of Bid Opening:Meeting Room, Floor 6, Guangren Building, No. 1, Guangren Road, Yuexiu District, Guangzhou
6、The bidder needs to register before the tender on www.chinabidding.com or chinabidding.mofcom.gov.cn. And the evaluation results will be released on www.chinabidding.com.
7、Contact Details
Purchasers:CEPREI Calibration & Testing Center
Add.:78 Zhucun Avenue West, Zhucun Street, Zengcheng District, Guangzhou
Contact:Miss Liang
Tel:020-87236480
Bidding Agency:Guangdong Hualun Tendering Co., Ltd.
Add.:Floor 7, Guangren Building, No. 1, Guangren Road, Yuexiu District, Guangzhou
Contact:Miss Song
Tel:020-83172166-846
8、Remittance Approach:
Bank(RMB):
Bank(USD):
Account NO.(RMB):
Account NO.(USD):